Electro Osmosis Damp Proof Course

Where the problem has been identified as rising damp, and where a damp proof course is absent or inadequate, we offer different methods of retrofitting a dpc (damp proof course).  Generally, a damp proof course is installed by Chemical injection or by means of Electro Osmosis.  Occasionally, it may be preferable to use the Newlath damp proof membrane system as a rising damp solution.

Electro Osmosis DPC

This is based on the theory that moisture rises from the earth by capillary and osmotic action, causing an electrical potential to develop between the wall and the earth. The introduction of an electric current interferes with the mechanics of this moisture flow. There are two electro osmotic methods, the passive system and the active system.

The passive system relies on earthing a copper strip inserted at approximately ½ meter intervals into 2/3 of the thickness of the wall. The earth rod, or the series of earth rods, short out the electrical potential, thus stopping further rising damp.

The active system uses a low DC current from a mains transformer, directed to wires linking up to anodes in the wall, providing an electric charge repelling the charged water molecules rising from the ground.

Electro osmosis DPC is usually used for stone buildings; however, our knowledgable surveyors have years of experience in determining which method is the best solution for each situation. We provide a detailed written report on the findings of the survey, along with a competitive quotation for any remedial work required.  Our surveyors will also identify any timbers affected by wet rot or dry rot and suggest remedial works, if necessary.  We may provide an insurance backed guarantee for all remedial damp works carried out.
Error with embedding the source
oohembed source: